We provide G3 Certified Unvented Hot Water Cylinder Servicing, Repairs & Installations in Driffield, East Riding of Yorkshire, and nearby areas.
Unvented cylinders are safe to use if they are installed correctly and if they undergo regular maintenance by a qualified engineer.
They have three levels of safety built-in:
A ‘thermostat’ that prevents the water from heating above 60-65 degrees.
A ‘high-level cut-out stat’ that operates at 80-90 degrees if the thermostat fails.
A ‘temperature relief valve’ that will operate if both the thermostat and high-level cut-out stat fails.
If these safety features are faulty there is a risk that the water will over-heat and cause a pressure build up within the tank which can cause the cylinder to explode. Therefore, it is important to get a yearly check-up.
Check your cylinder for leaks and faults
Carry out electrical checks
Check that the pressure and temperature relief (safety) valves are working
Ensure that the safety discharge pipework (D2 pipework) is not blocked or restricted
Check flow rate to water outlets
Clean the strainer located within the combination valve – this is prone to blocking with limescale and can restrict flow/performance to water outlets
Check expansion vessel pressure and re-charge if needed
We charge £80 for a service. If we come across any faults or issues with your unvented cylinder whilst carrying out the service, we will provide you with a fixed price quote to repair the problem.
We not only install and service hot water cylinders, but we also offer a professional unvented cylinder repair service.
The most common unvented cylinder repairs we’re asked to fix include:
Water getting too hot
Water not getting hot
Water leak in airing cupboard
Low pressure
Expansion vessel replacement
Immersion heater replacement
If you need a repair carrying out to your unvented hot water cylinder, simply book an engineer online of contact us on 01482 770650.
If you are thinking of replacing your existing unvented hot water cylinder or having a new one installed in your home.
One of our experts will visit you to carry out a site survey. They will check things like the mains pressure and flow rate, and the location where the new cylinder is to be installed, to ensure that the cylinder can be fitted to building regulations and that it is the right solution for your home.
They will then go over your options and provide you with a quote for the works.
For a free, no obligation quote on a new unvented cylinder installation in Driffield, contact us today.
We cover all surrounding areas near Driffield, including:
View all